Stoner Molding Solutions
A complete system covering mold cleaning, release, ejector-pin lubrication and rust protection for industrial molding.
Clean → Release → Produce → Protect
93234 CUT Cleaner
E206 · E302 · E342 · E408 · E236
E436 Release + Ejector Pin Lube
A612 · A677
Mold Release Agents
Select by molded material, mold material, temperature and downstream finishing requirements.
For plastics, rubber, waxes and similar molded materials; supports fast release and multiple demolding cycles per application.
For parts that will be painted, plated, hot-stamped, bonded, labeled or decorated after demolding without an added surface-cleaning step.
Creates a durable release film for repeated demolding while supporting many post-mold finishing operations.
Dry-film release for plastics, rubber and composites; silicone-, oil- and wax-free for parts requiring painting or decorating after molding.
A 2-in-1 solution combining mold release and ejector-pin lubrication for plastics, rubber and similar molded materials.
For cast urethanes and integral-skin foam; supports fast demolding, reduces sticking and helps limit surface defects caused by mold adhesion.
* According to the Stoner brochure supplied by GKTECH.
Cleaning & Mold Protection
Removes grease, waxes and contaminants from metal molds and tooling.
- 12 oz aerosol
- No hazardous chlorinated solvents
Heavy-duty bulk cleaner for routine maintenance of metal molds and tooling.
- 5-gallon pail / 55-gallon drum
- Removes grease, resin and carbon deposits
Removes cured polyurethane, polyurea and difficult build-up from metal tooling.
- For metal tooling only
- 5-gallon pail / 55-gallon drum
Fast cleaner for release agents, oils, grease, carbon, wax and silicones on metal molds; evaporates quickly without residue.
Provides overnight or weekend protection with a thin film that works off during startup, reducing the need for pre-production cleaning.
Heavy-duty film protecting molds, tooling and equipment from moisture, oxidation and corrosion during extended storage or shipment.
Need help selecting a Stoner release?
Send the molded material, mold material, temperature and post-release requirements so GKTECH can recommend a suitable chemistry.